Standard Foot Sealer – KS700

KS700 – Standard Foot Sealer

Jaw-type Foot Sealer with standard width of seal (approx 2,3mm)

A robust sealer like this is intended for sealing plastic bags, in a production environment, with the operator seated (if the height/orientation of the jaw does not suit your needs, take a look at our semi-automatic sealers). This sealer contains a power transformer which is capable of the repetitive demands of production type usage. Its element is covered with a heat-resistant fabric which is coated with non-stick PTFE – from which soft plastic can be wiped easily. If required, this sealer can be fitted with an element 5mm wide (which we believe is unnecessary for sealing plastic).
If you wish to make bags from a roll of tubing, one of our sealers which have sharp cutting blades would be better. To use this sealer to make bags from tubing, use scissors, or use a box-cutter knife and a plank, to cut from the tubing.
There are other models of sealer, different from this one, intended for centre-folded film. To use this sealer to make bags from a roll of centre-folded film – would be clumsy.
An impulse-type sealer like this one – consumes power when sealing – very little power at all when merely switched on. This makes it suitable for intermittent use. There is no need to batch the sealing work or wait minutes for warm-up or cool-down before or after making seals.
On impulse sealers, the elements and insulating sheets (Teflon) are consumable. Order a spare pack of elements, a spare pack of adhesive Teflon, and a spare piece of non-adhesive Teflon, with this sealer.

Voltage: 220
Number of Phases: 1
Frequency (Hertz): 50
Power Draw (Watts): 990
Seal Length (mm): 700
Seal Width (mm): 3
Seal Thickness (PE) (microns): 250
Seal Thickness (PP) (microns): 100
Net Mass (kg): 35.5
Packed Mass (kg): 36
Packed Length (cm): 74
Packed Width (cm): 42
Packed Height (cm): 45